Industrial L3 16-Port 10/100/1000T 802.3at PoE + 4-Port 1G/2.5G SFP managed ethernet switch

Code : IGS-6325-16P4S

Advanced Manageable PoE Solution for Hardened Environment

PLANET IGS-6325-16P4S L3 Industrial Managed PoE+ Switch boasts 16 10/100/1000BASE-T 802.3at PoE+ ports with each capable of providing up to 36 watts of power. Featuring a robust power budget of up to 360 watts, this switch ensures abundant power for all connected devices. In addition to its PoE+ ports, it comes equipped with 4 100/1000/2500BASE-X fiber ports, housed within a rugged IP30 metal case. This design not only enhances its durability but also makes it suitable for deployment in the most challenging settings. It features intuitive yet advanced IPv6/IPv4 management interfaces, empowering users with efficient control and configuration. Its feature-rich design includes a plethora of L2/L4 switching functions, Layer 3 OSPFv2/v3 dynamic routing capability, and cutting-edge ITU-T G.8032 ERPS Ring technology, ensuring seamless connectivity and rapid self-recovery in the event of network disruptions.

Physical Port

  • 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector function
  • 4 100/1000/2500BASE-X slots for SFP type auto detection
  • One RJ45 console interface for basic management and setup

 

Power over Ethernet 

  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Up to 16 IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE management features
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE admin-mode control 
    • PoE port power feeding priority
    • Per PoE port power limit
    • PD classification detection
    • PoE extend mode control to support power feeding up to a distance of up to 160 meters
  • Intelligent PoE features
    • Temperature threshold control
    • PoE usage threshold control
    • PD alive check
    • PoE schedule

 

Industrial Protocol

  • Modbus TCP for real-time monitoring in the SCADA system
  • IEEE 1588v2 PTP (Precision Time Protocol) 

 

Industrial Case and Installation

  • IP30 aluminum case 
  • DIN-rail or wall-mount design
  • 48~54V DC, redundant power with reverse polarity protection
  • Supports 6KV DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature 

 

Digital Input and Digital Output

  • 2 digital input (DI)
  • 2 digital output (DO)
  • Integrate sensors into auto alarm system
  • Transfer alarm to IP network via email and SNMP trap

 

Layer 3 IP Routing Features

  • Supports maximum 128 static routes and route summarization.
  • IPv4 dynamic routing protocol supports RIPv2 and OSPFv2. 
  • IPv6 dynamic routing protocol supports OSPFv3.
  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode.

 

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
    • Broadcast/Multicast/Unicast
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 4K VLANs groups, out of 4094 VLAN IDs
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) 
    • Private VLAN Edge (PVE)
    • Protocol-based VLAN
    • MAC-based VLAN
    • Voice VLAN 
    • GVRP (GARP VLAN Registration Protocol)
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Maximum 10 trunk groups with 20 ports per trunk group 
    • Up to 8Gbps bandwidth (duplex mode) 
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port 
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)
  • Compatible with Cisco Uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
  • Link Layer Discovery Protocol (LLDP) 

 

Quality of Service

  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS
    • IP TOS/DSCP/IP precedence
    • IP TCP/UDP port number
    • Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing on the switch port
  • DSCP remarking

 

Multicast

  • Supports IPv4 IGMP snooping v1, v2 and v3
  • Supports IPv6 MLD snooping v1 and v2
  • Querier mode support
  • IPv4 IGMP snooping port filtering
  • IPv6 MLD snooping port filtering
  • MVR (Multicast VLAN Registration)

 

Security

  • Authentication
    • IEEE 802.1x port-based / MAC-based network access authentication
    • Built-in RADIUS client to co-operate with the RADIUS servers
    • TACACS+ login users access authentication
    • RADIUS / TACACS+ users access authentication
    • Guest VLAN assigns clients to a restricted VLAN with limited services
  • Access Control List
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
  • Source MAC / IP address binding
  • DHCP Snooping to filter un-trusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder

 

Management

  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
    • Console/Telnet Command Line Interface 
    • Web switch management
    • SNMP v1 and v2c and v3 switch management
    • SSHv2, TLSv1.2 secure access
  • SNMP Management
    • Four RMON groups (history, statistics, alarms, and events) 
    • SNMP trap for interface Link Up and Link Down notification
  • IPv6 IP address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Reset button for system reboot or reset to factory default
    • Dual Images
  • DHCP Functions:
    • DHCP Relay
    • DHCP Option 82
    • DHCP Server 
  • User Privilege levels control
  • Network Time Protocol (NTP)
  • Network Diagnositc
    • SFP-DDM (Digital Diagnostic Monitor)
    • ICMPv6/ICMPv4 Remote Ping
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • PLANET NMS System and Smart Discovery Utility for deployment management
  • SMTP/Syslog remote alarm
  • System Log
  • Provides ONVIF for co-operating with PLANET video IP surveillances

Please call for pricing and availability

Code : IGS-6325-16P4S